0

Addressing of Siemens PLC S7 200

Digital Input
I0.0 to I0.11
Digital Output
Q0.0 to Q0.7
Analog Input
IW0
Analog Output
QW0

Timers
T32 to T63
For Timers : Time Delay = Time Base * Preset
Time Done Bit : Tx
Where X is address of Timer used.


Counters
C0 to C63
For Counter:  Preset is number of Counts.
Counter Done Bit : Cx
Where X is address of counter used.

Integer
VW0 to VW1022
Binary
V0.0 to V1023.7

Programming Software : Microwin
Driver For Programming: PPI Driver.
Driver For SCADA Communication : S7200PPI DDE

Post a Comment

 
Top